Eje de Pedalier Wheels Manufacturing Inc. PF30A Cannondale Shimano
Eje de Pedalier Wheels Manufacturing Inc. PF30A Cannondale Shimano
Este producto está agotado y no volverá a estar disponible en nuestro surtido de productos.
- Valoración de Trustpilot 4.7/5
- Devoluciones fáciles
Haz una pregunta sobre este producto.
Envía un correo al servicio al clienteDescripción
Descripción
The Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket is made of two durable aluminum cups that must be screwed together inside the frame. This ensures that these bottom bracket bearings stay firmly in the frame for long life. Plus, this makes these bearings very easy to maintain!
Suitable for Cannondale
Cannondale is the only manufacturer to use the Pressfit 30a fit. Wheels Manufacturing Inc. has therefore made this bottom bracket especially for Cannondale bikes. Not all Cannondale models use the Pressfit 30a fit. So pay close attention to that and measure your bottom-bracket if in doubt.
Durable and replaceable bearings
This Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket uses Enduro Abec-3 bearings. These are smooth-running bearings with excellent sealing. So your crank will spin extra long and smoothly thanks to these bearings. And should the bearings ever wear out, you can replace them quite easily yourself.
Color: Black
Bottom Bracket/Frame Interface: Cannondale PF30A
Bottom Bracket Shell Width: 73mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 91mm in 73mm wide shell*
Crank Spindle Diameter: 24.00mm
Tool Pattern: 44mm x 16 notch
Weight: 158g
• 24mm cranksets
Mostrar más
Mostrar menos
Suitable for Cannondale
Cannondale is the only manufacturer to use the Pressfit 30a fit. Wheels Manufacturing Inc. has therefore made this bottom bracket especially for Cannondale bikes. Not all Cannondale models use the Pressfit 30a fit. So pay close attention to that and measure your bottom-bracket if in doubt.
Durable and replaceable bearings
This Wheels Manufacturing Inc. PF30A Cannondale Shimano bottom bracket uses Enduro Abec-3 bearings. These are smooth-running bearings with excellent sealing. So your crank will spin extra long and smoothly thanks to these bearings. And should the bearings ever wear out, you can replace them quite easily yourself.
Tecnología
Bearings: Enduro ABEC-3Color: Black
Bottom Bracket/Frame Interface: Cannondale PF30A
Bottom Bracket Shell Width: 73mm
Bottom Bracket Shell I.D.: 46mm
Over Bearing Width: 91mm in 73mm wide shell*
Crank Spindle Diameter: 24.00mm
Tool Pattern: 44mm x 16 notch
Weight: 158g
Compatibilidad
• Cannondale PF30A frames• 24mm cranksets
Producto relacionado
Producto relacionado
Compartir los productos mencionados anteriormenteWheels Manufacturing Inc. PF30A Cannondale Shimano | Rotor 4624 MTB | |
0 opiniones | 2 opiniones | |
Adecuado para | De carretera / MTB | De carretera / MTB |
Ajuste del eje del pedalier | Shimano Hollowtech II (24 mm) | Shimano Hollowtech II (24 mm) |
Anchura de eje del pedalier | 73 mm Asimétrico (Cannondale) | 68 mm / 73 mm |
Diámetro eje del pedalier | 46 mm | 46 mm |
Diámetro exterior rodamientos del eje de pedalier | 44 mm | |
Color | Negro | Negro |
129,99 | 48,95 | |
Producto actual | Ver producto |
Todas las especificaciones
General
Marca
Wheels Manufacturing Inc.
Adecuado para
De carretera / MTB
Anchura de eje del pedalier
73 mm Asimétrico (Cannondale)
Diámetro eje del pedalier
46 mm
Diámetro exterior rodamientos del eje de pedalier
44 mm
Color
Negro
Rosca
No
Tipo de Eje de Pedalier
Pressfit 30A
Material del cuadro
Carbono